ITP A3 EOS and Maratac AAA beamshots comparison
This beamshot was done to compare the ITP/Maratac light to some other AAA lights, it is part of my Danish review.

DSC_8351

I have select all 3 ITP/Maratac models and some other common AAA flashlights, both a cheap one (E01) and some powerful lights. The lights are (Same sequence as picture): ITP 1 level, ITP 3 level, Maratac, Fenix E01, Fenix LD01, LumaPower Avenger GX, Leatherman S2, LiteFlux LF2XT.
All light (except ITP/Maratac) is described in A look at AAA flashlights, and has beamshots in Beamshots from AAA flashlights

BrightnessMax

First at look at the maximum amount of light each flashlight is capable off. ITP/Maratac is about the same level as LD01, but cannot match LF2XT on LiIon. Use of LiIon in ITP/Maratac/LD01 would increase their output, but the lights are not specified for LiIon use.

Brightness

Next I have collected all the brightness settings in the same graph, this shows that ITP/Maratac has a very wide range from low to high, much wider than LD01, GX is close to the same range and LF2XT has an even larger range.

BrightnessLux

The last graph shows brightness, measured at 1 meter. The brightness matches the amount of lights, i.e. the optical system on the different lights is not that different in how they focus the lights.



Whitewall at maximum brightness

ITP 1 level, ITP 3 level, Maratac
DSC_8395 DSC_8399 DSC_8403

Fenix E01, Fenix LD01, LumaPower Avenger GX
DSC_8407 DSC_8411 DSC_8415

Leatherman S2, LiteFlux LF2XT (NiMH), LiteFLux LF2XT (LiIon)
DSC_8419 DSC_8427 DSC_8423



Maximal brightness

ITP 1 level, ITP 3 level, Maratac
DSC_8378a DSC_8368a DSC_8371a

Fenix E01, Fenix LD01, LumaPower Avenger GX
DSC_8373a DSC_8376a DSC_8381a

Leatherman S2, LiteFlux LF2XT (NiMH), LiteFLux LF2XT (LiIon)
DSC_8383a DSC_8387a DSC_8385a



Minimal brightness
Single level lights uses the same picture as above.

ITP 1 level, ITP 3 level, Maratac
DSC_8378a DSC_8366a DSC_8369a

Fenix E01, Fenix LD01, LumaPower Avenger GX
DSC_8373a DSC_8374a DSC_8379a

Leatherman S2, LiteFlux LF2XT (NiMH), LiteFLux LF2XT (LiIon)
DSC_8382a DSC_8386a DSC_8384a



Minimal brightness, increased exposure
To better compare the low brightness, these pictures are process with 2 steps more brightness.

ITP 1 level, ITP 3 level, Maratac
DSC_8378c DSC_8366c DSC_8369c

Fenix E01, Fenix LD01, LumaPower Avenger GX
DSC_8373c DSC_8374c DSC_8379c

Leatherman S2, LiteFlux LF2XT (NiMH), LiteFLux LF2XT (LiIon)
DSC_8382c DSC_8386c DSC_8384c

Dark reference:
DSC_8372c



ITP 1 level
DSC_8430

DSC_8394 DSC_8395 DSC_8396 DSC_8397

DSC_8378a

DSC_8378



ITP 3 level
DSC_8431

DSC_8398 DSC_8399 DSC_8400 DSC_8401

Low, medium, high:
DSC_8366a DSC_8367a DSC_8368a

Low:
DSC_8366

Medium:
DSC_8367

High:
DSC_8368



Maratac
DSC_8432

DSC_8402 DSC_8403 DSC_8404 DSC_8405

Low, medium, high:
DSC_8369a DSC_8370a DSC_8371a

Low:
DSC_8369

Medium:
DSC_8370

High:
DSC_8371



Fenix E01
DSC_8433

This flashlight has a single brightness setting, and exists in different body colors.

DSC_8406 DSC_8407 DSC_8408 DSC_8409

DSC_8373a

DSC_8373



Fenix LD01
DSC_8434

This light has 3 levels and always turns on in medium.

DSC_8410 DSC_8411 DSC_8412 DSC_8413

Low, medium, high:
DSC_8374a DSC_8375a DSC_8376a

Low:
DSC_8374

Medium:
DSC_8375

High:
DSC_8376



LumaPower Avenger GX
DSC_8435

This light has 3 levels and remembers last selected level. Changes in brightness are done by light presses on the power switch, before turning on.

DSC_8414 DSC_8415 DSC_8416 DSC_8417

Low, medium, high:
DSC_8379a DSC_8380a DSC_8381a

Low:
DSC_8379

Medium:
DSC_8380

High:
DSC_8381



Leatherman S2
DSC_8436

This light has two levels and always starts on low, high is selected with a light press on the switch.

DSC_8418 DSC_8419 DSC_8420 DSC_8421

Low, high:
DSC_8382a DSC_8383a

Low:
DSC_8382

High:
DSC_8383



LiteFlux LF2XT
DSC_8437
DSC_8438

The world's most advanced AAA lights, it is possible to select between floating adjust or a number of fixed levels. Some other settings can also be programmed, including a lot of flashing modes. The first picture shows the standard LF2XT, the second picture is a LF2XT with a custom titanium body.

NiMh:
DSC_8426 DSC_8427 DSC_8428 DSC_8429

LiIon:
DSC_8422 DSC_8423 DSC_8424 DSC_8425

Low, high (NiMH):
DSC_8386a DSC_8387a

Low (NiMH):
DSC_8386

High (NiMH):
DSC_8387

Low, high (LiIon):
DSC_8384a DSC_8385a

Low (LiIon):
DSC_8384

High (LiIon):
DSC_8385